ImplicitSurfaceNetwork/xmake/packages/b/blis/share/blis/config.mk

#
#
#  BLIS
#  An object-based framework for developing high-performance BLAS-like
#  libraries.
#
#  Copyright (C) 2014, The University of Texas at Austin
#  Copyright (C) 2022, Advanced Micro Devices, Inc.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are
#  met:
#   - Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#   - Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#   - Neither the name(s) of the copyright holder(s) nor the names of its
#     contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#

# Only include this block of code once
ifndef CONFIG_MK_INCLUDED
CONFIG_MK_INCLUDED := yes

# The version string. This could be the official string or a custom
# string forced at configure-time.
VERSION           := 1.0

# The shared library .so major and minor.build version numbers.
SO_MAJOR          := 4
SO_MINORB         := 0.0
SO_MMB            := $(SO_MAJOR).$(SO_MINORB)

# The name of the configuration family.
CONFIG_NAME       := x86_64

# The list of sub-configurations associated with CONFIG_NAME. Each
# sub-configuration in CONFIG_LIST corresponds to a configuration
# sub-directory in the 'config' directory. See the 'config_registry'
# file for the full list of registered configurations.
CONFIG_LIST         := skx knl haswell sandybridge penryn zen3 zen2 zen excavator steamroller piledriver bulldozer generic
FULL_CONFIG_LIST    := x86_64 intel64 amd64_legacy amd64 arm64 arm32 power skx knl haswell sandybridge penryn zen3 zen2 zen excavator steamroller piledriver bulldozer armsve a64fx altramax altra firestorm thunderx2 cortexa57 cortexa53 cortexa15 cortexa9 power10 power9 bgq rv32i rv64i rv32iv rv64iv sifive_x280 generic
FULL_SUBCONFIG_LIST := skx knl haswell sandybridge penryn zen3 zen2 zen excavator steamroller piledriver bulldozer armsve a64fx altramax altra firestorm thunderx2 cortexa57 cortexa53 cortexa15 cortexa9 power10 power9 bgq rv32i rv64i rv32iv rv64iv sifive_x280 generic

# This list of kernels needed for the configurations in CONFIG_LIST.
# Each item in this list corresponds to a sub-directory in the top-level
# 'kernels' directory. Oftentimes, this list is identical to CONFIG_LIST,
# but not always. For example, if configuration X and Y use the same
# kernel set X, and configuration W uses kernel set Q, and the CONFIG_LIST
# might contained "X Y Z W", then the KERNEL_LIST would contain "X Z Q".
KERNEL_LIST       := skx knl sandybridge penryn zen3 zen2 haswell zen piledriver bulldozer generic
FULL_KERNEL_LIST  := skx haswell zen knl sandybridge penryn zen3 zen2 piledriver bulldozer armsve armv8a armv7a power10 power9 bgq rvi rviv sifive_x280 generic

# This list contains some number of "kernel:config" pairs, where "config"
# specifies which configuration's compilation flags (CFLAGS) should be
# used to compile the source code for the kernel set named "kernel".
KCONFIG_MAP       := bulldozer:bulldozer generic:generic haswell:haswell knl:knl penryn:penryn piledriver:piledriver sandybridge:sandybridge skx:skx zen:zen zen2:zen2 zen3:zen3

# The operating system name, which should be either 'Linux' or 'Darwin'.
OS_NAME           := MSYS_NT-10.0-17763

# Check for whether the operating system is Windows.
IS_WIN            := yes
IS_MSVC           := yes

# The directory path to the top level of the source distribution. When
# building in-tree, this path is ".". When building out-of-tree, this path
# is path used to identify the location of configure. We also allow the
# includer of config.mk to override this value by setting DIST_PATH prior
# to including this file. This override option is employed, for example,
# when common.mk (and therefore config.mk) is included by the Makefile
# local to the 'testsuite' directory, or the 'test' directory containing
# individual test drivers.
ifeq ($(strip $(DIST_PATH)),)
DIST_PATH         := .
endif

# The C compiler.
CC_VENDOR         := clang
CC                := clang

# Important C compiler ranges.
GCC_OT_4_9_0      := no
GCC_OT_6_1_0      := no
GCC_OT_9_1_0      := no
GCC_OT_10_3_0     := no
CLANG_OT_9_0_0    := no
CLANG_OT_12_0_0   := no
AOCC_OT_2_0_0     := no
AOCC_OT_3_0_0     := no

# The C++ compiler. NOTE: A C++ compiler is typically not needed.
CXX               := g++

# The Fortran compiler. NOTE: A Fortran compiler is typically not needed.
FC                := FC-not-found

# Static library indexer.
RANLIB            := echo

# Archiver.
AR                := llvm-ar

# Python Interpreter
PYTHON            := python

# Preset (required) CFLAGS, CXXFLAGS, and LDFLAGS. These variables capture the value
# of the CFLAGS, CXXFLAGS, and LDFLAGS environment variables at configure-time (and/or
# the value of CFLAGS/CXXFLAGS/LDFLAGS if any was specified on the command line).
# These flags are used in addition to the flags automatically determined
# by the build system.
CFLAGS_PRESET     := -Wno-macro-redefined
CXXFLAGS_PRESET   := 
LDFLAGS_PRESET    := 

# The level of debugging info to generate.
DEBUG_TYPE        := off
ENABLE_DEBUG      := no

# Whether to compile and link the AddressSanitizer library.
MK_ENABLE_ASAN    := no

# Whether operating system support was requested via --enable-system.
ENABLE_SYSTEM     := yes

# The requested threading model(s).
THREADING_MODEL   := openmp single

# Whether the compiler supports "#pragma omp simd" via the -fopenmp-simd option.
PRAGMA_OMP_SIMD   := yes

# The installation prefix, exec_prefix, libdir, includedir, and shareddir
# values from configure tell us where to install the libraries, header files,
# and public makefile fragments. We must first assign each substituted
# @anchor@ to its own variable. Why? Because the subsitutions may contain
# unevaluated variable expressions. For example, '${exec_prefix}/lib' may be replaced
# with '${exec_prefix}/lib'. By assigning the anchors to variables first, and
# then assigning them to their final INSTALL_* variables, we allow prefix and
# exec_prefix to be used in the definitions of exec_prefix, libdir,
# includedir, and sharedir.
prefix              := /c/blis
exec_prefix         := ${prefix}
libdir              := ${exec_prefix}/lib
includedir          := ${prefix}/include
sharedir            := ${prefix}/share

# Notice that we support the use of DESTDIR so that advanced users may install
# to a temporary location.
INSTALL_LIBDIR      := $(DESTDIR)$(libdir)
INSTALL_INCDIR      := $(DESTDIR)$(includedir)
INSTALL_SHAREDIR    := $(DESTDIR)$(sharedir)

#$(info prefix      = $(prefix) )
#$(info exec_prefix = $(exec_prefix) )
#$(info libdir      = $(libdir) )
#$(info includedir  = $(includedir) )
#$(info sharedir    = $(sharedir) )
#$(error .)

# Whether to output verbose command-line feedback as the Makefile is
# processed.
ENABLE_VERBOSE    := no

# Whether we are building out-of-tree.
BUILDING_OOT      := no

# Whether we need to employ an alternate method for passing object files to
# ar and/or the linker to work around a small value of ARG_MAX.
ARG_MAX_HACK      := yes

# Whether to build the static and shared libraries.
# NOTE: The "MK_" prefix, which helps differentiate these variables from
# their corresonding cpp macros that use the BLIS_ prefix.
MK_ENABLE_STATIC  := yes
MK_ENABLE_SHARED  := no

# Whether to use an install_name based on @rpath.
MK_ENABLE_RPATH   := no

# Whether to export all symbols within the shared library, even those symbols
# that are considered to be for internal use only.
EXPORT_SHARED     := public

# Whether to enable either the BLAS or CBLAS compatibility layers.
MK_ENABLE_BLAS    := yes
MK_ENABLE_CBLAS   := yes

# Whether libblis will depend on libmemkind for certain memory allocations.
MK_ENABLE_MEMKIND := no

# The names of the addons to include when building BLIS. If empty, no addons
# will be included.
ADDON_LIST        := 

# The name of a sandbox defining an alternative gemm implementation. If empty,
# no sandbox will be used and the conventional gemm implementation will remain
# enabled.
SANDBOX           := 

# The name of the pthreads library. If --disable-system was given, then this
# variable is set to the empty value.
LIBPTHREAD        := 

# Whether we should use AMD-customized versions of certain framework files.
ENABLE_AMD_FRAME_TWEAKS := no

# end of ifndef CONFIG_MK_INCLUDED conditional block
endif